*All of this will be done on the Second-PC unless specifically instructed otherwise.
1. Make sure the DMA is properly inserted in a PCIe slot on the Gaming-PC.
2. Make sure that the Gaming-PC is powered on.
3. Plug the DMA USB-Cable into the “Update” port or “JTAG” on the DMA Card and the other end into the 2nd-PC.
Download DMA Flash Files: DMA-Flash-Files
4. Go into the ch347 Driver/CH341PAR, Run “SETUP” Click Install.
If shows Driver installed successfully, follow next step.
6. Go into the ch347-main\CH347FPGATool folder
Paste firmware in same folder.
7. Run CH347FpgaDownloadTool.exe as Admin
Check if everything is same as Red highlight.
8. Select Firmware File and Click FLASH.
9. Once it says something like; Close the ch347 ….., Change to the Data USB-Port on the DMA.
10.. Restart main PC
11. Run DMA Test File as Admin.
DMA TEST TOOL: Download
You are done with the flashing guide.
English 
Japanese